Moisture exposure and repeated freezing can contribute to masonry deterioration. Visible damage deserves a site-specific assessment; the weather alone does not diagnose the repair.
Updated September 10, 2026
Your home in Saint Paul.
About 68% of occupied homes in Saint Paul heat primarily with utility gas. Many chimneys in Saint Paul therefore vent a gas furnace, boiler, or water heater rather than a wood fire, and those flues still need inspection for liner condition, moisture, and blockage. About 0.3% of occupied homes in Saint Paul use wood as their primary heating fuel. Most fireplaces in Saint Paul see occasional use, and even occasional use calls for an inspection before the heating season. The nearest NOAA climate normals station (St Paul Downtown Airport, about 3 miles from the Saint Paul city center) averages 7,298 heating degree days per year. That is a long heating season in which venting runs for months and freeze-thaw cycles work on exposed masonry, so check exposed brick and the crown after winter from a safe position.
What you can observe safely
- Photograph changes from ground level.
- Stay clear of hanging ice and loose masonry.
What to avoid
- Do not climb onto the roof or enter the chimney.
- Do not alter gas components, venting, or safety controls.
- Do not use a test fire to diagnose the problem.
Possible causes to assess
- Moisture entering masonry
- Damaged water-shedding details
- Existing deterioration exposed by winter weather
A symptom cannot establish the cause remotely. An assessment of the complete system helps determine the appropriate repair.
Chimney repair in Saint PaulA few common questions
Can this be diagnosed from a photo?
A photo can document a symptom and help prepare a visit. It cannot confirm concealed conditions or establish that a chimney or fuel-burning appliance is safe.
Sources & further reading
Source checked 2026-09-10.