Thoughtful care. From chimney to hearth.
Washington Chimney Pros
Get an estimateEstimate
Washington Chimney Pros

Washington Chimney Pros · part of USA Chimney Pros

Request an estimate
WASHINGTON CHIMNEY PROS

White staining on chimney brick in Spokane, WA

White deposits need identification and a moisture assessment. Cleaning the visible mark alone may leave the cause unresolved.

Request an estimateRead the guide
Updated September 10, 2026Homeowner guidance
A harnessed technician examining the brick of a brick chimney with a concrete crown on an asphalt shingle roof in cold weather; illustrative image
Illustrative service image — not a documented company job
CHIMNEY / FIREPLACE / HOMEWashington
YOUR NEXT STEP

What to do first

Keep clear of the affected area and arrange a professional assessment. If the structure is unstable or there is immediate danger, leave and call emergency services.

This form does not dispatch emergency help.

Gloved hands testing white efflorescence on a brick face with a soft brush; illustrative image
Illustrative service image — not a documented company job
01 / A CLOSER LOOK

Do not choose a cleaner before the deposit is identified

Record whether the mark is powdery, streaked, or concentrated around particular joints without touching it. Ask whether moisture entry or incompatible previous treatments need attention. A proposed cleaning method should be suitable for the masonry and should not be presented as proof that the water source is fixed.

A 1970s two-story house with board-and-batten siding with a two-flue brick chimney on a steep gable roof rising above the roof; illustrative image
Illustrative service image — not a documented company job
02 / THE HOMEOWNER PERSPECTIVE

What the inspection should resolve

Ask for the cause, supporting photographs, limitations of the inspection, and a written recommendation about continued use. A repair quote should identify the affected parts and the reason for the proposed work.

THE SHORT ANSWER

White deposits need identification and a moisture assessment. Cleaning the visible mark alone may leave the cause unresolved.

Updated September 10, 2026

Your home in Spokane.

About 54% of occupied homes in Spokane heat primarily with utility gas. Many chimneys in Spokane therefore vent a gas furnace, boiler, or water heater rather than a wood fire, and those flues still need inspection for liner condition, moisture, and blockage. About 0.6% of occupied homes in Spokane use wood as their primary heating fuel. Most fireplaces in Spokane see occasional use, and even occasional use calls for an inspection before the heating season. The nearest NOAA climate normals station (Spokane Felts Field, about 5 miles from the Spokane city center) averages 6,294 heating degree days per year. That is a substantial heating season, so plan inspections before the first fire and look for new water or masonry changes after winter from a safe position.

What you can observe safely

  • Note whether stains return after rain.
  • Photograph the pattern without scraping or applying chemicals.

What to avoid

  • Do not climb onto the roof or enter the chimney.
  • Do not alter gas components, venting, or safety controls.
  • Do not use a test fire to diagnose the problem.

Possible causes to assess

  • Moisture movement
  • Soluble deposits
  • Other surface staining requiring identification

A symptom cannot establish the cause remotely. An assessment of the complete system helps determine the appropriate repair.

Chimney repair in Spokane

A few common questions

Can this be diagnosed from a photo?

A photo can document a symptom and help prepare a visit. It cannot confirm concealed conditions or establish that a chimney or fuel-burning appliance is safe.

Keep exploring

FROM QUESTIONS TO A CLEAR PLAN

Start with Washington Chimney Pros.

Spokane is already included in your request.

Loading the estimate form…